How to Boost Up Internet Speed with Linksys Router?

Linksys wireless routers are one of the best wireless routers in the networking world. But sometimes, you might face some issues related to internet speed and drop-offs on the wireless network. Is your Linksys router not getting full speed and you want to learn how to optimize Linksys router settings for higher internet speed? Not to worry. In this blog, you will get to learn how to boost up internet speed with the Linksys router. Here are some of the best tips that you need to learn in order to optimize router settings for speed.

• Router Placement
  Placement of your Linksys router is the main key. For the optimal performance, strongest signal strength, and widest network coverage, places your router in the center of your home. Make sure you place your router away from walls and other obstructions.
  
• Upgrade Firmware
  Firmware is a program that defines the functionality of your Linksys router. To enhance the performance of your Linksys router, Linksys releases the latest version of firmware after a fixed time period. Look for the availability of the latest firmware version on the official website of Linksys. This is one of the best ways to optimize Linksys router settings for higher internet speed.
• Look at your Modem
  Your modem is a device that you got from your ISP. If you have been using this modem for a long time, it could be time to upgrade it. If you are a gamer or a person who likes to stream high-quality videos, you will likely want to upgrade your internet service plan. Your router’s speed completely depends on the internet service plan which you have got from your ISP.
• Reduce Wireless Interference
  If your router is surrounded by wireless devices like a cordless phone, wireless printer, or microwave, you need to move your router away from these devices. Other wireless devices at your home can mess up with your Linksys router's wireless network.
  

  Also Read for: Why my Linksysmartwifi.com Not Working Properly?

• Optimize Router Settings
  In case you have a dual-band Linksys router and you love to play high-quality games and stream videos, you need to connect the device that you are using to perform these tasks to the 5GHz band. The 5GHz band allows your device to access the extra bandwidth of the internet connection. Do this, if you experience your Linksys router not getting full speed.
• Schedule Automatic Restarts
  Do you also unplug or reboot your Linksys router often to solve problems with speed or signal drops? If yes, schedule an automatic restart on your Linksys router while you are at work or school. This will solve most of your problems related to wireless speed or network drop-offs. This is the best way to optimize router settings for speed.

In this blog, we discussed some of the best ways to optimize Linksys router settings for higher internet speed. In case you experience your Linksys router not getting full speed, follow above-mentioned tips. We hope you liked this blog. For more related blogs, follow this section closely.

Why does my Linksys Router keep asking for Password?

Linksys routers are one of the best routers providing ultimate WIFI coverage with extreme speed. They come in dual-band and tri-band technology providing ultimate network speed to your devices. They not only make the best routers but also have the best mesh system and WIFI extenders. Sometimes there are some problems which are faced by the users concerning the routes and extenders. But the most common is related to the password.

Whenever any individual try to login Linksys router it, again and again, asks for passwords to grant access to the internet. This problem usually occurs when a computer or smart device is running with outdated software. The logon domain authentication happens when the connection you are using is not set correctly. When this happens, you may need to switch to another connection or make a correction to the current settings.

In this article, we are going to discuss some of the best methods that are surely going to help anyone with the issue related to the password. Mainly, there are two main steps that need to follow to create a new connection and help to solve the problem of being asked for a password.

• Detecting the Preferred Network Connection
• Connecting to a new Preferred Connection

 Detecting the preferred Network Connection

This is the first step that you need to follow regarding the problem of being asked for the logon domain while accessing to the internet connection.

• Firstly, go to your taskbar and locate the wireless connection icon
• Select the open network and sharing center.
• On the network and sharing window, click on manage wireless network on the left panel.
• Now select the name of the network and click remove.

Also Read for: Linksysmartwifi.com Not Working

Connecting to a new Preferred Connection

• On the taskbar click on the wireless connection icon.
• Double-click the wireless network name you would like to connect to.
• Once you will select the network name, wait until your device connects.

Note: If the network has security encryption, you may require entering the security key or passphrase.

These were some of the steps that are going to help you regarding the password login issue related to the Linksys Router Login. If still, you are unable to do so then call us on our toll-free number and let our experts handle it for you. As they are available for you 24/7.

7 Steps that will help you to Secure your Router

Whenever you purchase a router the first thing that comes up to your mind is how to secure your router? The movement the router is connected to the network, there are chances that it may get affected with any malware or infected virus. That can enter the router through a particular server of a site through the network.

Many wireless router users think that their router cannot be threatening to them. But here we are going to tell you some of the steps that are important for you to understand and protect your router from getting harmed by any virus or malware. These steps will help you to improve your home network security and you can easily access the internet with your networking devices.

Change the Admin Password

One of the most serious mistakes that are made by the users is using the default admin password. That is combined with some non-critical remote vulnerability or an open wireless connection, which might give criminals full control over the router. If you have not done this until so far then we recommend you reset the password to make it more sophisticated.

 Also Read for: How to Solve Linksys Router 322 Error?

Disable Remote Management

The second most problem that is often encountered is the open access to the router’s control interface. Usually, the producers enable only LAN based router controls by default, but this not always the case. You need to make sure whether your router’s control interface is available over the web. 

Disable Broadcast SSID

According to the rule, a wireless router always transmits a WIFI network ID to everyone. This may be changed by unchecking the corresponding box in the settings. Then your network won’t be easily hacked. However, you will have to enter the SSID every time you connect the device to the network.

Use Reliable Encryption

We strongly recommend that you should not admit every single person to your network if your subscription is unlimited. Among the usual folks, there can be skilled hackers in search of a free connection. Additionally, cyber criminals can use your home network for illicit activities and police could end up at your doorstep. So, we suggest you enable WPA2 encryption and setting a strong password for your wireless hotspot.

 Also Read for: How to Login Linksys Router via Guest Account Login

UPnP et al.

If we see today, the wireless routers are not capable of serving a WIFI access hotspots and facilitating internet access to LAN nodes, but they also support different protocols to automatically align and join connected smart devices.   

Update Build-in Software

Router owners are not good at keeping track of firmware updates. We suggest you use up-to-date firmware from the vendor's official website. They can frequently patch vulnerabilities and mistakes, which can open the point of entry to hackers willing to compromise your network. The instructions on how to update software are stored on a separate tab in the router’s web interface. All you need to do is to download the firmware’s image, back up the router’s configuration, run the update and restore the configuration after restarting your system.  

 Also Read for: How to Fix Linksys Router Error Code 2318?

Not just the Router

Absolutely the ultimate protection does not exist, as the years have proved. A sensible approach to router settings is using strong passwords and encryption and timely update to the firmware. It will significantly contribute to a higher level of safety of your wireless network, but it does not guarantee 100% percent security of saving your network from hacking.

These were some of the tips that are going to help you to save your router from hacking and any other malware through the server. If you are still unable to do so then call us on our toll-free number and let our experts handle it for you, as they are available for you 24/7.

How to Fix Linksys Router Error Code 2178?

The Linksys router error code has become of the most prominent issues. The Linksys error code 2178 is caused due to the damage to the windows system file. When the system files are corrupted, it majorly affects the state of the computer. There can be various reasons that have caused system file errors such as incomplete driver, software installation or incorrect deletion of files and applications. Another reason it can be caused if your system has recovered from some kind of virus attack or malware.

The error can also occur if the system has been shut down wrongly. All of these activities cause wrong entries in the windows system file. The specific cause of the error is due to an IP conflict. This error is usually caused when the devices on the network which have either the same name or IP address. To fix Linksys router error code 2178 you can switch off the devices which are connected over a network, then turn each of them one by one. If you still face the problem then turn off your devices again and then access your Linksys cloud account.

Also Read: How to Fix Linksys Router Error 2117?

Methods to fix Linksys router Error Code 2178

Solution 1

• In the initial step restart all your connected devices one by one and perform on/off functions to all the devices.
• To fix Linksys router error code 2178 open your Linksys cloud account and click on the network map option. 
• Rename all your devices with different names.
• If you are still unable to get away with this error code 2178 then reset your router, disconnect all of the devices and follow the proper Linksys setup process. 

Solution 2

• Identify the erroneous device and isolate it out.
• Now, find the settings-general option and scroll down to the main option where you will find the process of I-tunes WIFI sync.
• Turn off the WIFI settings of that particular device that is causing an error with the router.
• You can also enable and disable the settings by logging into the Linksys router on local mode.
• Open the list of network devices and delete all the faulty devices on the network.
• If the device is found, tap on add new device tab and stop again. 
• Again, turn on the faulty device and try to reconnect to the network.    

Also Read About: Linksys Router Error Code 2318

 

If all the above solutions don’t help you to get away with the Linksys error code 2178. Then call us on our toll-free number and let our experts handle it for you as they are available for you 24/7.